GREASE TRAPS

Grease Traps separate low viscosity mineral liquids (oil and fat) that are not soluble in water. Need to separate these substances is to prevent them from entering the drainage system where they cause serious blockages.

Furthermore these substances once allowed to enter the natural soil drainage system, are endangering ecological system.

Also oil floating on the top of the wastewater prevents the correct operation of the sewage treatment plants.

Method of operation

Grease traps relies on the principle that the density of the liquids are different, keeping fat and oil on the top of the water.

Special design and position of the baffle plates inside the trap provides draining from the bottom, keeping unwanted substances on the top of the drain. Some bigger models are equipped with the valves on the level of grease accumulation in order to discharge it from the trap without empting the system.

Grease traps are equipped with the strainer, which collects larger solids or garbage in order to prevent blockage of outlet pipes and gullies. These strainers are manufactured with different sizes of outlet holes depending on use.

The Grease Traps are installed into a waste water line before gullies and they can be positioned inside or preferable outside the room allowing thoroughly cleaning and eliminating smell and mess associated with that.

Standard range of the ROFO Grease traps is designed to cover all requirements of the standard applications and include the following models:

RO GT 500 has the following features:

ROGT500.JPG (41274 bytes)
ROGT500 parts.jpg (38623 bytes)

Click on the thumbnails
to view the bigger Picture
(To return to this window please Click [X] on top right corner.)

  • Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
  • Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
  • Single phase separation
  • A large solid strainer basket with bottom draining cutouts covered with the fine S/S mesh
  • Easy to remove cover and basket for cleaning;
  • The discharge pipe is fully accessible once the inspection cover has been dismantled;
  • Flow Rate: 1.5 l/sec
  • Material Stainless Steel 304
  • Size (W)x(H)x(D) = 500x400x300
  • Inlet/Outlet 50mm

Typical uses: Coffee Shops, Restaurants, Super Markets, Fast Food Outlets

Top of Page


RO GT 400 has the following features:

Click on the thumbnails
to view the bigger Picture
(To return to this window please Click [X] on top right corner.)


  • Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
  • Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
  • Single phase separation
  • A large solid strainer basket with wide bottom draining cutout covered with the fine perforated plate Dia 3mm
  • Easy to remove cover and basket for cleaning;
  • The discharge pipe is fully accessible once the inspection cover has been dismantled;
  • Flow Rate: 4.5 l/sec
  • Material Stainless Steel 304
  • Size (Dia)x(H) = 400x1250 (adjustable
  • Inlet/Outlet 100mm

Typical uses: Hospitals, Meat & Poultry Processing Plants, Hotels, Food Factories

Top of Page


RO GT 700 has the following features:

Click on the thumbnails
to view the bigger Picture
(To return to this window please Click [X] on top right corner.)

  • Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
  • Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
  • Double phase separation
  • Two large strainer baskets made of perforated plate, with solid bottom tray
    Primary strainer made of perforated plate Dia 6mm
    Secondary strainer made of perforated plate Dia 3mm
  • Easy to remove cover and baskets for cleaning;
  • The discharge pipe is fully accessible once the inspection cover has been dismantled;
  • Flow Rate: 4.5 l/sec
  • Material Stainless Steel 304
  • Size (W)x(H)x(D) = 700x400x400
  • Inlet/Outlet 50/100mm

Typical uses: Restaurants, Steak Houses, Commercial Kitchens, Butcheries, Bakeries, Super Markets

Top of Page


RO GT 1700 - THREE COMPARTMENT GREASE TRAP has the following features:

Click on the thumbnails
to view the bigger Picture
(To return to this window please Click [X] on top right corner.)

  • Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
  • Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
  • Triple phase separation
  • Three large strainer baskets made of perforated plate, with solid bottom tray
    Primary strainer made of perforated plate Dia 6mm
    Secondary strainer made of perforated plate Dia 6mm
    Tertiary strainer made of perforated plate Dia 3mm
  • Easy to remove cover and baskets for cleaning;
  • The discharge pipe is fully accessible once the inspection cover has been dismantled;
  • Flow Rate: 4.5 l/sec
  • Material Stainless Steel 304
  • Size (W)x(H)x(D) = 1725x775x400
  • Inlet/Outlet 100mm

Typical uses: Hotels, Hospitals, Food Factories, Catering Industry, Commercial & Industrial Kitchens

Top of Page


RO GT 2000 has the following features:

ROGT2000.JPG (69823 bytes)

Click on the thumbnails
to view the bigger Picture
(To return to this window please Click [X] on top right corner.)

  • Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
  • Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
  • Separated Strainer and Grease trap
  • Two large strainer perforated baskets Dia 10mm with solid bottom tray
  • Easy to remove cover and baskets for cleaning;
  • Two stage grease extraction with fat take off valve
  • Built in Suction valve for empting the grease trap
  • The discharge pipe is fully accessible once the inspection cover has been dismantled;
  • Flow Rate: 7 l/sec
  • Material Stainless Steel 304
  • Size (W)x(H)x(D) = 3000x900x1000
  • Inlet/Outlet 100mm

Typical uses: Prisons, Hotels, Hospitals

Who's Online

We have 40 guests online

Search

Login